______________________________________________________________________________________ Kevin Umberger
                      4385 Kirkwood ln
                     Plymouth, MN 55422
763.746.6533
Kevin769554@yahoo.com
Education		
Dunwoody College of Technology /Minneapolis/ Jan 2012-July 2012
Right Skills Now for Manufacturing (CNC) Diploma

ASQ Certified Quality Inspector January 2017

American Welding Society Certifications: Understanding Welding Symbols June 2017, Welding Fundamentals 1 April 2017, Science of Non-Destructive Testing March 2017, Safety in Welding March 2017, Metallurgy 1: Fundamentals February 2017, Fabrication Math 1 & 2 January 2017

Certified in Intermediate and Advanced G D & T November 2016

Hexagon Metrology PC-DMIS CMM programming certifications July 2014
PC-DMIS programming for CMM 101
PC-DMIS programming for CMM 102
PC-DMIS programming for CMM 103

IPC-A-610 Acceptability of Electronics Assemblies certification January 2013

Level 2 Mechanical/Receipt inspector certification October 2014

National Institute for Metalworking Skills (NIMS)
Measurement, Materials and Safety Certified   April 2012
CNC Milling certified operator      May 2012
CNC Lathes certified operator      May 2012

Armstrong High School   High School Diploma 2005

Work Experience

Wrico Stamping Company/July 2016-Present
First article, In-process, Final inspection
Faro Arm and Manual CMM experience
Experience with using polyworks software on Faro Arm CMM
Calibrate Faro Arm CMM and use laser scanner
Train others on operation of Faro Arm and CMM
Send parts to plating and re-inspect after plating
Inspection of welds and understanding weld symbols
Good understanding of G D & T and print reading ability
Use optical comparator and all basic hand tools and gages
Good problem solving skills and troubleshooting ability

Westinghouse Par Nuclear/Level 2 Receipt Inspector/Measuring and Test Equipment Coordinator/Shoreview/MN/October 2014-April 2015
Write Documentation Issue Reports (DIR) when documentation received was not acceptable.
Write Non-Conformance Reports (NCR) when part or material received was not acceptable.
Ship and receive all measuring and test equipment used for calibration.
Write a Corrective Action, Prevention, and Learning plan (CAPAL) on measuring and test equipment items that were found to be out of calibration.
Test equipment received to ensure calibration was done properly.
Maintain relationship with contracted calibration vendor regarding quality and service.
Work with engineers to correct blueprint errors.
Good knowledge of ASTMS and blueprint requirements.
Perform dimensional inspections when needed. 

Quality Technician/CMM Programmer Production Engineering Co./Minneapolis/MN/July 2013-September 2014
Proficient in performing first-article, in-process, and final inspections of precision products for appearance, dimensional characteristics, and performance characteristics.
Extensive CMM Programming experience using PC-DMIS.
Excellent troubleshooting and problem solving skills.
Good knowledge of ISO 9000 and AS9100.
Write programs for OASIS optical profile inspection comparator.
Efficient in planning and performing gauge control and calibration.
Use standard inspection equipment such as Height Gauges, Surface Plates, Venires, Dial Indicators, Ring /Plug Gauges, Optical Comparators, Micrometers, and CMM.
Accurately document first article inspection findings.
Check in and document incoming materials and parts.
Issue Non-Conformance Reports (NCR’s) on non-conformances..
Effectively communicate program and machining discrepancies to appropriate machinists and engineers for proper adjustments.

Mechanical/Electrical Inspector / Micro Control / Fridley / MN / August 2012-June 2013
Ability to read and interpret various blueprints and technical drawings
Test and measure finished products, components for functioning, operation and accuracy to functional specification 
Proficient to inspect machinery of all sizes and shapes
Examine and inspect wire harnesses, coaxial cables, and electrical jig boards, for completeness of assembly, quality, and conformance to blueprints.
Inspect wiring of assemblies for accuracy of stripping, soldering, crimping and for defects; test continuity and examine placement of components
Conduct measurements on parts ensuring they are within blueprint specification
Record test results and operational data to ensure conformance to standards
Maintain and verify all documents regarding inspection process
Clean and maintain test equipment and instruments to ensure proper functioning
Completes necessary procedures to satisfy licensing requirements and indicates concurrence with acceptance or rejection decisions
Receive and ship products while demonstrating outstanding communication skills

Continental Engineering and Manufacturing Inc. (Intern) / Chaska / summer 2012
Plans machining by studying work orders, blueprints, materials, specifications, reference planes, locations of surfaces, and machining parameters
Interpreted geometric dimensions and tolerances (GD&T).   
Accurate inspection of parts and knowledge of inspection tools (micrometer, caliber, comparator, gages)
Maintained specifications by observing drilling, grooving, and cutting, including turning, facing operations; taking measurements
Detected malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.
Processed high quantity of metal parts on CNC lathes and Mills machines accurately and efficiently
Thorough understanding of G and M codes
Effectively changed inserts and inspected parts
Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. 		
               Cart Attendant/Cashier / Target / Plymouth / Oct. 2011 – Dec. 2011 
Efficiently tend to carts and maintain inventory
Customer service

               Cart Attendant / Sam’s Club / Maple Grove / MN / Feb. 2008 – Jan.2010	
Assemble and repair cart machines
Tend to carts and effectively maintain inventory
Heavy lifting and packing

Clean Team Supervisor / Cub Foods / Plymouth / MN / Nov. 2005 – Feb. 2007 
Excellent leadership and communication skills
Train and assist new employees on company  procedures and policies of operating machines
Repair and operate equipment    _____________________________________________________________________________________________________________