Zebadiah Zittle
zittle81@yahoo.com
(716) 783-6075
Cocoa Beach, FL  32931

Summary of Experience 
•	Over 15 years of experience in manufacturing specializing in the programming of CNC machines.
•	Fluent with GD&T and Engineering Drawings
•	Experienced working in an ISO 9001 and ISO 13485 environments.
•	Expereinced with 4 and 5 axis complex, high speed machining and equipment utilization, maximizing productivity, efficiency and quality assurance.
•	Experienced working in Kaizen, Kanban, TQM, and Lean Manufacturing environments. 
•	Very Strong problem solving and troubleshooting ability.

Professional Experience
March 2012 - April 2015
Sohacki Industries LLC, St. Augustine, FL
NC Programmer 
Set-up, operation and programming of 3, 4, and 5 Axis CNC Mills (MAZATROL)
Set-up, operation and programming of 3 Axis CNC Mills (HAAS)
Make fixtures or any other work holding devices that are needed to run the job
Set up machines for anywhere from 3 to 6 operators
When all operators were running machines, then focus would be to concentrate on custom parts. (Usually only 1 or 2 parts)
Used Master Cam X6, X7 and X8 for all the CNC Mills

October 2007 - February 2012
FlashFlo Manufacturing Inc., Buffalo, NY 
NC Programmer 
Set-up, operation and programming of CNC Mills (HAAS)
Set-up, operation and programming of CNC Mill pallet changer (DAEWOO) with Mitsubishi control
Set-up, operation and programming of CNC Mills (EXCEL) with FANUC control
Make fixtures or any other work holding devices that are needed to run the job
Experienced on CMM measuring machine as well as Vision System 
Also have some experience in Master Cam for more complicated programming. Go through program at the machine and ensure that the program is correct before running through

May 2006 – October 2007
Miller Roll Grinding & Manufacturing Inc., Mechanicsville, VA 
NC Programmer 
Set-up, operation and programming of CNC Mills (MAZATROL)
Operation, offset changes and tool changes on CNC Lathes (MAZATROL)
Make fixtures or any other work holding devices that are needed to run the job
Some work on manual Mills

August 2004 – May 2006
Quest Manufacturing Inc., Orchard Park, NY 
CNC Programmer / Lead Inspector 
Set-up, operation and programming of CNC Mills (MAZATROL)
Operation, offset changes and tool changes on CNC Lathes (MAZATROL)
Lead inspector on 2nd shift
Calibrated and set-up the inspection equipment that was needed for the job at hand

June 2000 – July 2004
Horschel Brothers Precision LLC., Springville, NY 
Machinist / Inspector 
Set-up and operation of CNC Mills (FANUC)
Set-up tools and inspection equipment for the job running if needed
Operation of CNC Lathes (FANUC)
Lead inspector on 2nd shift as well as 3rd shift
Cell leader: (In charge of the quality and quantity of 4 operators’ parts)
Special training in inspection equipment and inspection methods